Home  |  Helpdesk  |  Technical Library  |  Standard Dial up  |  Email  |  Ka9Q eMail

Ka9Q eMail

( Note: This software is not supported by the Demon Helpdesk ).

Please see our Important Notice, we recommend that you read it before you proceed.

To configure KA9Q follow these simple steps.

Press D. Configure Net

Press option A. Configure Autoexec.net and Dialer

In the section marked Node name enter your hostname

See our  Names & Password Conventions  guide.

In the section marked Your IP Address enter your Demon IP Address

Select the correct Com port for your modem.
And finally enter the correct Serial Port Speed for your modem.

Press F5 to configure the dialer.

In the String section enter ATZ or AT&F (depending on your modem)

For dial command enter ATDT

Enter the number of attempts you wish to dial. In the event of the number being busy.
Enter the access number. See our Access Numbers guide.

In the password section enter your Demon Login Password

And finally enter for Prompt send: PPP
Press F3 to update and save the settings.

Press Esc (Escape)

We will now configure the News settings.
press E. Configure News.

Press A.

In the User Name field enter Your Demon hostname

See our Names & Password Conventions guide.

In the Full name field enter Your Name.
Reply to is your e-mail address you wish replies to be delivered to.
Press F3 to update and save the settings.
Press Esc to get back to the main screen.

We will now configure Email.
Press F. Configure Mail.

In the top User name field enter your username.

The next field down is for your Demon hostname, enter your hostname.

For the Full user name enter Your Name.

Next is your reply to address enter your reply to address.

See our Names & Password Conventions guide.

Enter the name of your prefered text editor in the field supplied.

Make sure the printer is set to the right port and then press F3 to update and save the settings.

Now press Esc to return to the main screen.

KA9Q is now set up to connect to Demon Internet and use the mail and news services.

IMPORTANT NOTICE

These walkthroughs have been provided only in order to assist you and are intended for use in conjunction with your computer and KA9Q. These walkthroughs relate to products that are not our products. These walkthroughs are available for use at the user's own risk and we accept no liability whatsoever for any loss you may incur arising out of your use of these walkthroughs. You expressly accept this by following the walkthroughs. If you have difficulty following these walkthroughs, please contact our customer support service on the number given below.

Back to top