Home  |  Helpdesk  |  Technical Library  |  Standard Dial up  |  How to Set Up and Connect  |  MAC TCP Setup

How to setup and connect to MAC TCP Setup

Please see our Important Notice, we recommend that you read it before you proceed.

Click the Open MacTCP...
Click the FreePPP icon if necessary.
Click More...

On the initial screen, as shown below, you will see an IP address box. This will show either 192.0.0.0 or 0.0.0.0.

If you have been assigned a Static IP address, then once you have set up MacTCP it will be shown in the IP address box.

Once you have selected More, the resulting window (as below) is where you enter Domain names and IP (Internet Protocol) addresses.

Once you have entered all of the information as above, close the window and the settings should save in your Preferences folder under MacTCP preferences.

IMPORTANT NOTICE

These walkthroughs have been provided only in order to assist you and are intended for use in conjunction with your Mac and the MAC TCP Setup. These walkthroughs relate to products that are not our products. These walkthroughs are available for use at the user's own risk and we accept no liability whatsoever for any loss you may incur arising out of your use of these walkthroughs. You expressly accept this by following the walkthroughs. If you have difficulty following these walkthroughs, please contact our customer support service on the number given below.

Back to top